apertis-update-manager-amd64-rollback manual

low

Image Types:
hmi-amd64
Image Deployment:
OSTree
Type:
functional

Description

Test the automatic rollback and blacklist mechanism of apertis-update-manager.


Resources

  • A static encrypted update bundle file of the same architecture, variant and version as the testing image
  • A Fat32 USB flash drive, preloaded with the encrypted update bundle at the root of the disk
  • The latest static encrypted update file can be downloaded at the same location than the Apertis image. It has the same basename, and a '.delta.enc' extension
  • The static encrypted update file should be copied to the flash drive using the name 'static-update.bundle.enc'.
  • A PC must be connected to DUT serial port

Execution Steps

  1. Check the initial deployment
  2. $ sudo ostree admin status
  3. Prepare the copy of commit and deploy to allow the upgrade to the same version
  4. Command below shows you an initial commit ID, for instance
  5. $ export BOOTID=$(sudo ostree admin status | sed -n -e 's/^\* apertis \([0-9a-f]*\)\.[0-9]$/\1/p'); echo $BOOTID
  6. Get the Collection ID and ref
  7. $ export CID=$(sudo ostree refs -c | head -n 1 | tr -d '(),' | cut -f 1 -d ' '); echo COLLECTION_ID=$CID
    $ export REF=$(sudo ostree refs -c | head -n 1 | tr -d '(),' | cut -f 2 -d ' '); echo REF=$REF
  8. Create the list of files to skip and ensure there are some files in these directories
  9. $ ls -1d /usr/share/locale /usr/share/man /usr/share/zoneinfo > /tmp/skip
    $ du -sh /usr/share/locale /usr/share/man /usr/share/zoneinfo
  10. Create the commit with changed timestamp and skipped list from above to allow upgrade with recent update file
  11. $ export NEWID=$(sudo ostree commit --orphan --tree=ref=$BOOTID --add-metadata-string=ostree.collection-binding=$CID --bind-ref=$REF --timestamp="1 year ago" --skip-list=/tmp/skip); echo "New commit: $NEWID"
  12. Deploy the prepared commit
  13. $ sudo ostree admin upgrade --allow-downgrade --deploy-only --override-commit=$NEWID --reboot
  14. Wait until the system is booted again and check the deployment
  15. $ sudo ostree admin status
  16. The booted commit (started with '*') must have ID which we prepare and the initial commit ID should be marked as '(rollback)'
  17. Check booted deployment have no file objects which we skip
  18. $ du -sh /usr/share/locale /usr/share/man /usr/share/zoneinfo
  19. Remove the initial deployment
  20. $ sudo ostree admin undeploy 1
  21. Reboot the system
  22. Check the current deployment
  23. $ sudo ostree admin status
  24. Start the user interface agent with mode preventing automatic system reboot after update
  25. $ sudo updatectl --register-upgrade-handler &
  26. Plug the USB flash drive into the device
  27. The update starts automatically
  28. After the update, the device does *not* reboot automatically
  29. Check that the user interface agent reports the pending update
  30. ** Message: Upgrade status: Checking

     ** Message: An upgrade is pending

  31. Remove the USB flash drive
  32. Check if there is pending deployment and reboot the DUT
  33. $ sudo ostree admin status
    $ sudo reboot
  34. When the >Shell prompt is seen execute bootx64
  35. Wait for 2 seconds and press the reboot button
  36. Repeat this 4 times followed by a reset and 1 more time to let it boot completely
  37. To check the bootcount status enter FS0:, then ls
  38. $  Shell> FS0:
    $  FS0:\> ls
    $  Directory of: FS0:\
    $  12/14/2020  03:15 <DIR>           512  EFI
    $  12/15/2020  09:21 <DIR>           512  loader
    $  12/15/2020  08:37 <DIR>           512  ostree
    $           0 File(s)           0 bytes
    $           3 Dir(s)
    $     ls loader\entries
    $     FS0:\> ls loader\entries
    $     Directory of: FS0:\loader\entries\
    $     12/14/2020  03:15 <DIR>         1,024  .
    $     12/14/2020  03:15 <DIR>           512  ..
    $     12/15/2020  08:37                 565  ostree-0-1.conf
    $     12/15/2020  08:37                 565  ostree-0-2+0-4.conf
    $     FS0:\>    2 File(s)       1,130 bytes
    $               2 Dir(s)
  39. boot count is correctly set for ostree-0-2 +0-4 means there is 0 left boot and 4 tries
  40. Wait for system boot
  41. Wait a few seconds after the boot to allow ostree to undeploy the deployment. Check the update has been rolled back and that only single deployment exists.
  42. $ sudo ostree admin status
  43. Start the user interface agent
  44. $ sudo updatectl &
  45. Plug the USB flash drive with the same update file into the device
  46. Check that the user interface agent reports the system is up to update
  47. ** Message: 09:21:45.026: Upgrade status: Checking

    ** Message: 09:21:45.300: System is up to date

  48. Check the journal log should mention that the update ID has been blacklisted
  49. $ sudo journalctl -ef --unit apertis-update-manager

    May 01 09:21:45 apertis apertis-update-[363]: mount added : /media/APERTIS

    May 01 09:21:45 apertis apertis-update-[363]: mount added : /media/update

    May 01 09:21:45 apertis apertis-update-[363]: Ostree static delta starting

    May 01 09:21:45 apertis apertis-update-[363]: Metadata read from commit '710dbec2943510e4deb279cd6738a4a1a5b589eb6c4976e486d056e0308a02e1': {'ostree.ref-binding': <['apertis/v2022pre/armhf-uboot/fixedfunction']>, 'ostree.collection-binding': <'org.apertis.os'>}

    May 01 09:21:45 apertis apertis-update-[363]: Revision '710dbec2943510e4deb279cd6738a4a1a5b589eb6c4976e486d056e0308a02e1' is marked as blacklisted; skipping

    May 01 09:21:45 apertis apertis-update-[363]: Ostree already up to date


Expected

UEFI is able to detect rollback situation

UEFI is able to use rollback configuration for bootloader

The "failed" update is rolled back

"Failed" update is marked as blacklisted

Apertis-update-manager is able to detect blacklisted update and refuse to update the system with it